11-11-2012 07:28 PM - edited 07-03-2021 11:01 PM
Hi, Somebody knows if it is possible to convert an Autonomous AP 2602i to Lightweight just changing firmware as the first generation Aironet APs?
11-11-2012 07:32 PM
Yes you can convert it to lightweight. Just need the lightweight recovery image.
Sent from Cisco Technical Support iPhone App
11-11-2012 07:33 PM
Here is a link
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
Sent from Cisco Technical Support iPhone App
05-05-2014 09:17 AM
IIRC:
Telnet into the Access Point
ap# archive-sw /overwrite /reload tftp://server_ip/ap3g2-rcvk9w8-tar.152-4.JB5.tar
and just let it rip.
should reboot, join in to your WLC and get its configurations if DHCP is set up correctly.
06-26-2014 05:23 PM
Worked like a charm! Thank you!
*Edited* the command i had to use was slightly different "archive download-sw /overwrite /reload tftp://<IP address>/ap3g2-k9w8-tar.152-4.JB5.tar"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide