coverage hole

[wyfy-2015]

Hi,

1  ) Controller shows  most of the ap are  in  power level '1' ( tpc is  auto ) in both  a  and b 

Does it means do we have a lot of coverage holes  ? 

2 ) What is the antenna gain for a 3702i  ap ?

Thanks

[Rasika Nayanajith]

Post below output 

1. show advanced 802.11a txpower

2. show advanced 802.11b txpower

Here is the 3702i antenna gain

Integrated antenna
● 2.4 GHz, gain 4 dBi, internal omni, horizontal beamwidth 360°
● 5 GHz, gain 4 dBi, internal omni, horizontal beamwidth 360°

Refer this for more details

http://www.cisco.com/c/en/us/products/collateral/wireless/3700-series-access-point/data_sheet_c78-729421.html

HTH

Rasika

*** Pls rate all useful responses ***

[wyfy-2015]

Hi,

My controller is 5760 , i think that command won't work ,

Can you tell me the equivalent command.

Thank you 

[Rasika Nayanajith]

Try this on your 5760

show ap dot11 5ghz summary
show ap dot11 24ghz summary

HTH

Rasika

[wyfy-2015]

Hi Rasika ,

I have attached 2 files. I just removed ap name and  mac address 

Thank you 

[mohanak]

Internal Antennas

The 3702I model access point is configured with four dual-band inverted-F antennas, and two 2.4-GHz/5-GHz dual-band radios.

There are four antennas deployed inside the access point with one deployed on each corner of the 3702I access point top housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features are as follows:

• Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.
• Antenna unit integrated into the 3702I model access point.
• Peak gain is approximately 4 dBi in both the 2.4-GHz and 5-GHz bands.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/3700/quick/guide/ap3700getstart.html#pgfId-59096

[wyfy-2015]

Hi,

What will be the EIRP  value of the 3702i with a 4 dBi with a fixed value of power ( 1,2,3..5)

Thanks