Create new WLAN in one branch office only

[Kjetil Fleten]

Hi 

In a Flexconnect setup with many branch offices, I want to create a new WLAN that should only be visible in one particular branch office. Most AP's are in the AP group "default-group". I have created a new AP group for the purpose, but when I create a new WLAN for that new AP group, it will also populate the "default-group". It seems like "default-group" can not be modyfied ?

Can I create a new WLAN whitout spreading it to all AP's in "default-group" ?

Regards

Kjetil

[Stephen Rodriguez · Accepted solution]

you can, you just need to create the new WLAN with an id greater than 16.

So if you create it as WLAN id 17, it will have to be put into an AP group to be visible.

HTH,

Steve