cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

CUWSS home lab requirement

Babak KHorshid
Beginner
Beginner

Hello All

I got my CCWNA last week and im planning for CUWSS.

i need to set up a home base lab and with this I think I need some software and hardware because its about site survey. I dont want to buy useless apps and hardarwe so can you tell me what do i need to set up for this course? 

 

I already at work have access to 3702 AP

5508 WLC

and WCS

 

Regards

and thanks for your time 

1 ACCEPTED SOLUTION

Accepted Solutions

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

I would suggest Ekahau site survey software if you could afford

http://www.ekahau.com/wifidesign/ekahau-site-survey

There are some other vendors also have site survey products

https://airmagnet.flukenetworks.com/estore/software/

https://www.acrylicwifi.com/en/wlan-software/wifi-site-survey-software-acrylic-heat-maps/

Again, this may not merely for your CUWSS exam, but to plan your RF design works.

I would also suggest to see if these CWNP wireless courses get refresh. If so I would go with that.

 

HTH

Rasika

View solution in original post

1 REPLY 1

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

I would suggest Ekahau site survey software if you could afford

http://www.ekahau.com/wifidesign/ekahau-site-survey

There are some other vendors also have site survey products

https://airmagnet.flukenetworks.com/estore/software/

https://www.acrylicwifi.com/en/wlan-software/wifi-site-survey-software-acrylic-heat-maps/

Again, this may not merely for your CUWSS exam, but to plan your RF design works.

I would also suggest to see if these CWNP wireless courses get refresh. If so I would go with that.

 

HTH

Rasika

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: