Debug filling with unrelated info from 8540 WLC

[pannick]

Hey Gang,

I am running 8.10.171.0 code on my 8540 WLC HA Pair. When running a debug client xx.xx.xx.xx.xx.xx yesterday I receive a lot of the data that I will paste below. Has anyone else experienced this? Maybe a bug when running debug?

There were hundreds of lines of this. It seemed related to everyone client associated with another WLAN/SSID

Thanks

*Dot1x_NW_MsgTask_1: Jul 11 17:03:14.623: [PA] apfVapRadiusNasIpAddrGet: Client C2:0E:60:01:A5:91 NAS IP Attribute: 10.16.0.9
*Dot1x_NW_MsgTask_1: Jul 11 17:03:14.629: [PA] apfVapRadiusNasIpAddrGet: Client C2:0E:60:01:A5:91 NAS IP Attribute: 10.16.0.9

[Mark Elsen]

 - Perhaps if you have debugs fully analyzed with : https://cway.cisco.com/tools/WirelessDebugAnalyzer/ , you may get more insights on this.

 M.

[Rasika Nayanajith]

is this the client MAC address you enabled for debugging "C2:0E:60:01:A5:91"?

I tested one of my 8540 running the same code version, Did not see the specific message for my client's MAC address.

HTH
Rasika
*** Pls rate all useful responses ***