Have just made some changes to a network to add 2 SSIDs to give basically guest and office access over the Aironets. Equipment in network is:
Cisco ASA 5510
Cisco 3750 Switch
Aironet 1231G K9 x 2
basic config is VLAN 1, VLAN 10 and VLAN 20 on switch and each has its own DHCP pool. The Aironets are configured with the VLANs 10 and 20.
When connecting to the Aironets with a wireless client, on one SSID the ip address assigned by DHCP is in correct network, but when we try to connect to the other SSID we get an ip address from the wrong DHCP pool. To eliminate a config issue on switch I have connected a PC directly to the switch and test allocation of ip address for each DHCP pool and it works fine. The problem is only with the assignment from the Aironets.
Hello fellas, in need of bitcoin wallet customer phone support number? Well, now you can relax as bitcoin wallet customer phone support has been established to make sure that none of bitcoin wallet customers have to face any kind of bitcoin wallet issues ...
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...