DHCP errors Meraki MR42

[MarkB]

All,

I'm seeing lots of these DHCP errors, the DHCP server is up, functioning and connectivity is ok - any idea how best to troubleshoot this?  APs are Meraki MR 42 with Meraki switches, DHCP is running on a Windows server. 

Client made a request to the DHCP server, but it did not respond.vlan_id='354' request_ip='XXX' request_server='unknown' details='no_dhcp_response' roam_ap='XX' radio='1' vap='0' channel='48' rssi='10'

Client XX roamed from AP XX then had a failed connection to SSID XX on AP XX because the DHCP server did not respond.

Client XX had a failed connection to SSID XX on AP XX because the DHCP server did not respond.

 

[Mark Elsen]

 - You may also go here : https://community.meraki.com/t5/Wireless-LAN/bd-p/wireless-lan for that particular question

 M.

[ammahend]

As Marce1000 said, post it on Meraki community. 
for roaming the IP shouldn’t change unless you are doing NAT mode or your roaming APs are in different vlans and you don’t have L3 mode enabled.