cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4778
Views
0
Helpful
2
Replies

DHCP errors Meraki MR42

MarkB
Level 1
Level 1

All,

 

I'm seeing lots of these DHCP errors, the DHCP server is up, functioning and connectivity is ok - any idea how best to troubleshoot this?  APs are Meraki MR 42 with Meraki switches, DHCP is running on a Windows server. 

 

Client made a request to the DHCP server, but it did not respond.vlan_id='354' request_ip='XXX' request_server='unknown' details='no_dhcp_response' roam_ap='XX' radio='1' vap='0' channel='48' rssi='10'

Client XX roamed from AP XX then had a failed connection to SSID XX on AP XX because the DHCP server did not respond.

Client XX had a failed connection to SSID XX on AP XX because the DHCP server did not respond.

 

 

2 Replies 2

marce1000
Hall of Fame
Hall of Fame

 

 - You may also go here : https://community.meraki.com/t5/Wireless-LAN/bd-p/wireless-lan for that particular question

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

ammahend
VIP Alumni
VIP Alumni

As Marce1000 said, post it on Meraki community. 
for roaming the IP shouldn’t change unless you are doing NAT mode or your roaming APs are in different vlans and you don’t have L3 mode enabled. 

-hope this helps-
Review Cisco Networking for a $25 gift card