dit address ip mangament for cisco 1815i controller ME

[Dhikra Marghli]

Hello

how i can edit address ip mangament for cisco 1815i controller ME ??

i have addres ip manger : 192.168.0.30 , so i wan to edit other addresss !!??

because i have a pool 19.168.0.0 /24 , so i want to edit other pool and other address ip managment for ME 1815i 

what command to edit ???

thanks

[luis_cordova]

Hi @Dhikra Marghli ,

I suggest you review this discussion of the community:

https://community.cisco.com/t5/wireless-and-mobility/ap-1815i-mobility-express/td-p/3711551

You will find in the answers some help with your doubt.

Regards

[Sandeep Choudhary · Accepted solution]

use this command on ME AP:

config interface address management <ip-addr> <ip-netmask> <gateway>

Also make sure you configured the swicthport correctly with allowed vlans.

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

IF i edit pool in the controller 1815i  and edit interface ip managment , 

so iif  edit  pool and ip management with commande CLI not per interface web ,,,???!!

that allow acces per interface web !! 

how i can edit pool dhcp and interface web managment per CLI ???

[Dhikra Marghli]

IF i edit pool in the controller 1815i  and edit interface ip managment , 

so iif  edit  pool and ip management with commande CLI not per interface web ,,,???!!

that allow acces per interface web !! 

how i can edit pool dhcp and interface web managment per CLI ???

[Sandeep Choudhary · Accepted solution]

is the DHCP pool used for other APs to get IP or for clients ?

My recommandation is:

1. Configure or Change mgmt ip of ME via CLI

2. Once you have access to ME via GUI then you can change the pool.

Regards

Dont forget to rate helpful posts