docsis wireless

[stephtchoko]

Hello

In docsis wireless, the upstream frequency translate if frequency(5Mhz to 42Mhz) to in rf frequency(500Mhz to 700Mhz).The upstream frequency are not specified in config-file (CMTS), but it is setting on rf module(upconverter and downconverter).

How do the cable modem will obtain the upstream rf ?

How we can configure the CMTS to download the appriopriate rf ?

please, it is very important.

Thank, Stephane.

[a-vazquez]

This cofiguration Tech Tip for Wireless gives the commands necessary,

http://www.cisco.com/en/US/products/hw/modules/ps2740/products_configuration_example09186a0080193dac.shtml