07-28-2022 01:50 AM
We actually have a hotel project, and we need to deploy APs that support zigbee to realize IoT terminal access.
Solved! Go to Solution.
08-01-2022 04:36 AM
Cisco is not the only manufacturer that has three-in-one APs (WiFi, BLE and Zigbee).
Another alternative is to design a solution where Zigbee is a totally separate solution/vendor. That one, one does not put all their eggs in one basket.
07-28-2022 02:00 AM - edited 07-28-2022 02:03 AM
Yes new Catalyst 9100 (c9120, c913x and cw916x) have an IoT radio to integrate with BLE, Zigbee and Thread, but for the integration you need DNA-C (https://www.cisco.com/c/en/us/products/collateral/wireless/access-points/guide-c07-744305.html)
07-28-2022 02:35 AM
Thank you for your reply! I read the link, can it be understood as deploying the IoX application on the AP through DNA to make it an IoT gateway, and all IoT terminals connect to this AP (IoT gateway) to communicate with the background server application?
Does C9105AX and C9115AX support this feature?
07-28-2022 04:28 PM
Yes and no.
All Catalyst 9k and AP4800 support Zigbee, however, Zigbee functions is turned off because Zigbee customers cannot afford to buy these APs. So the feature is not enabled.
07-28-2022 10:29 PM
Ok,Under the premise of requiring WiFi coverage, it can also support the access of third-party IOT terminals, which is the product advantage
07-28-2022 10:45 PM - edited 07-28-2022 10:45 PM
@LQ Wang wrote:
Ok,Under the premise of requiring WiFi coverage, it can also support the access of third-party IOT terminals, which is the product advantage
Cisco APs' Zigbee is software disabled.
07-28-2022 11:00 PM
How to activate the zigbee function?
07-28-2022 11:29 PM
@LQ Wang wrote:
How to activate the zigbee function?
Cisco has software-disabled Zigbee function.
07-28-2022 11:38 PM
That is to say, it cannot be put into practical use yet.
07-29-2022 06:21 PM - edited 08-01-2022 07:03 PM
The biggest users of Zigbee are the hotel, resorts and hospitality industry with keycard door. Cisco has been targeting this industry by introducing the ultra-premium 4800 which introduced Zigbee (software disabled, of course). I was told that Zigbee will only be enabled if-and-only the "demand picks up".
(And before the pandemic, profits in this industry is razor thin. When the pandemic hit, tourism stopped overnight. And a number of industry operators simply did not have the financial capability to survive one year without any paying guests much more two years.)
Upgrading to an AP that supports Zigbee is not just an answer. It is the start of a problem. A financial one. It is not just a question of swapping out existing AP with a 4800 or Catalyst 9k and Presto, Bob's your uncle. No, it is not. 4800 requires more than 30.1wac of PoE. This means the owner of the facility will need to upgrade the switches to something that can do uPoE (60wac).
Cisco has incorporated Zigbee into premium products while other manufacturer have them working/enabled in lower target market.
After a switch, the next in the list is the WLC because AireOS cannot-and-will-not support Zigbee. It will be the new 9800. And it cannot be an eWLC either. It has to be a 9800 appliance platform.
It is yet still unknown if Cisco's Zigbee implementation will be a subscription-based but I am suspecting it will be.
So now, do the maths: Even with 50% discount, how many can afford to upgrade?
(There may be some very rich operator who have made confidential & commercial agreements with Cisco that have Zigbee enabled for themselves. But I have not yet heard of anything.)
A lot of operators have seen the price and they asked themselves this simple question: If it ain't broke, why upgrade?
07-30-2022 01:33 AM
Thank you for your patience in answering. One of our CBD projects needs to cover WiFi6, and also needs to meet the access of zigbee IOT devices. In addition, we also choose Cisco C9800 series AC controller and DNAC server, so we have this problem to confirm. From this perspective, there are many factors involved in choosing a Cisco AP, thanks again.
08-01-2022 04:36 AM
Cisco is not the only manufacturer that has three-in-one APs (WiFi, BLE and Zigbee).
Another alternative is to design a solution where Zigbee is a totally separate solution/vendor. That one, one does not put all their eggs in one basket.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide