Does the 3802 series support Bridge Links

[PAR]

Hi,

Previously we have used the 3602 for P2P bridges in autonomous mode, does the 3802 support the same Bridging capabilities?

thanks.

Paul.

[Rasika Nayanajith · Accepted solution]

Hi Paul,

1800/2800/3800/4800 series model APs are not supported in Autonomous mode.

So cannot be configured as root bridge/non-root bridge like in 3600/3700.

HTH

Rasika

*** Pls rate all useful responses ***

[PAR]

Thanks Rasika

[pheidema]

Take a look at this......

Configuring Point-to-Point Mesh Link with Ethernet Bridging on Mobility Express APs

https://www.cisco.com/c/en/us/support/docs/wireless/mobility-express-aironet-access-points/215077-configuring-point-to-point-mesh-link-wit.html

This article will explain the process of deploying Point-to-Point mesh links with Ethernet Bridging using Cisco Mobility Express (ME) software on Cisco 1542 outdoor Access Points. Mesh support on Mobility Express software for indoor and outdoor APs in Flex+Bridge mode was introduced in release 8.10. 

The following AP models are supported:

• As an ME Root AP:Cisco AireOS 1542, 1562, 1815s, 3802s APs

• As a Mesh AP: Cisco AireOS 1542, 1562, 1815s, 3802s APs