cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1122
Views
5
Helpful
3
Replies

Does the 3802 series support Bridge Links

PAR
Beginner
Beginner

Hi,

 

Previously we have used the 3602 for P2P bridges in autonomous mode, does the 3802 support the same Bridging capabilities?

 

thanks.

 

Paul.

1 Accepted Solution

Accepted Solutions

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

Hi Paul,

 

1800/2800/3800/4800 series model APs are not supported in Autonomous mode.

 

So cannot be configured as root bridge/non-root bridge like in 3600/3700.

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

3 Replies 3

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

Hi Paul,

 

1800/2800/3800/4800 series model APs are not supported in Autonomous mode.

 

So cannot be configured as root bridge/non-root bridge like in 3600/3700.

 

HTH

Rasika

*** Pls rate all useful responses ***

Thanks Rasika

pheidema
Cisco Employee
Cisco Employee

Take a look at this......

Configuring Point-to-Point Mesh Link with Ethernet Bridging on Mobility Express APs

https://www.cisco.com/c/en/us/support/docs/wireless/mobility-express-aironet-access-points/215077-configuring-point-to-point-mesh-link-wit.html

This article will explain the process of deploying Point-to-Point mesh links with Ethernet Bridging using Cisco Mobility Express (ME) software on Cisco 1542 outdoor Access Points. Mesh support on Mobility Express software for indoor and outdoor APs in Flex+Bridge mode was introduced in release 8.10. 

The following AP models are supported:

  • As an ME Root AP:Cisco AireOS 1542, 1562, 1815s, 3802s APs

  • As a Mesh AP: Cisco AireOS 1542, 1562, 1815s, 3802s APs

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers