Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
Ho Folks. I'm doing a degree work and I have some gear here to make some tests, but failing... I bought a Cisco AIR-LAP1142N-E-K9 on ebay and using evaluation version of vWLC. I have already tried two various versions of vWLC: Air CTVM-7-3-101-0 and...
Hi Team, we started migrating from 5520 to 9800, including one Guest SSID with LWA. We did the same a few weeks ago on another site, everything worked fine. We uploaded WebAuth Bundle to the new WLC, exactly the same as for the first one, (Administra...
Hi everyone, I am setting up radius to work with our web filter (smoothwall). I need to enable 'Frame IP addresses' for accounting packets that are sent to the web filter, so that traffic is correctly identified to the user.Please can anyone point ou...
Hi, I have no idea how to set up this device. I have the Catalyst 2960 Series SI PoE-24 and AIR-CAP1602E-K-K9 models.I set in this order - Internet Modem - Router - POE, and I am planning to connect the AP next, but I do not know how to create AP SS...
When trying to delete a specific alarm on an AP I am getting the following message:Error occurred when updating alarm: Unable to load alarm-rest/Alarms status: 500Tried power cycling the AP and factory resetting it. Im thinking it's a Prime issue.
I have problems with cisco ISE as proxy radius and WLC version 8.3.143.0. ISE sends the authentication request to the external radius, receives the access accept and returns it to the wlc. Aparently everything is working, I put the On Access-Accept, ...
Hello there,hope you can help me with this. I have a little site with a WLC and 3 Aironet 1830 APs that suddendly, all together, stopped the join with the local WLC. Everything worked right and we had no firmware/image update of any kind.They worked ...
Hello All, I have been hit with an issue I can’t seem to figure out… My DPC3941T running on Xfinity has consistently been having its 2.4 MHz radio transmitter deactivated in the 3-4am hour the last five nights. The 5 MHz transmitter continues to wor...
Hi everyone,Currently in the process of trying to setup AAA for our WiFi on our WLC so that users have to authenticate.The problem is I have accidentally added 'management' to the options for who to use the radius server for and now I can't access my...
Hello,we have an issue with our APs getting disconnected from WLC with this message:The AP "AP-NAME" is CAPWAP disconnected from WLC and is no longer joined to it. The WLC has missed the AP’s CAPWAP heartbeat message.They connect immediately back but...
Good morning from Germany,in my homelab I noticed that one client (only one) don't get an IP address from my C9800-CL (17.9.1). All other clients (phones, laptops, a camera, even a washing machine) can connect like desired.My setup:I have a C9800-CL ...
only ban single mac address at specified ap.not impact on other ap and ssid connection.best regards.
After upgrading to 17.6.3 from 17.3.5a the 802.1x is not working. After a rollback it works. No change in network.
background:1852I in ME mode. 1702I flash to correct version as matrix list.from 8.10 , 8.8, 8.5 , until 8.2used JPN , JF10 until JC15.both have the problem on 1702I joined in vWLC on 1852I, "%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to xxx....
Resolved! Configuring Air-CAP3602I-A-K9
I was given a couple of Air-CAP3602I-A-K9, that are already configured. I did not get the controller that they were setup with. I had to get one, it is cisco 2500 series. This is my first time trying to setup AP using a controller and I am running in...
