Hi experts.
I have this network:
- 01 AP 1231
- ACS v4.0
I try to config dynamic VLAN with LEAP.
SSID is WLAN map with vlan 1
Without attribute 64,65,81, I connect this WLAN ok and users alway is connected to vlan 1.
When I use attribute 64,65,81 and use
attribute 64 is vlan, attribute 65 is 802
user test1 has attribute 81 is 1
user test2 has attribute 81 is 2,
test1 connect WLAN successful (map to vlan 1) but test 2 can't authenticate successful with ACS Server.
I try to follow this link ( but not use Wireless LAN Controller 😞
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
help me,plz
Thanks
Tran Chung
