Wireless

Hello. Users are complaining that their drives are not being mounted with a script that automatically runs as the user logs in. This makes sense since I am using EAP-Fast authentication and the computer does not have an IP address until after the use...

Hi All,Can AP for outdoor can be used for outdoor without any protection? for my previous project, I use a weather proofed box to protect the AP, drill a hole in the weather proofed box to connect external antenna to the outdoor AP inside. But I am d...

I have upgraded our WLC 4404 to new version 4.1.171.0, since the upgrade the table showing the number of clients connected does not decrease when a client disconnects from the associated AP. Is this a BUG?, this worked OK with version 4.0

Hello All,Any one, Can you explain WPA2 settings in Cisco Aironet 1240AG Series Access point?Please Help me!Thanks & RegardsManic

Hi i am working at a site with 4 1230 aironet access points & 1 ce 500 switch , there is no encryption / no authentication configured , all the devices are in the same vlan , the client devices are able to get the dhcp addresses & they get registered...

Hi i am working on a site with 2 cisco 7920 ip phones (firmwware 3.01) & 2 1230 aironet access points 12.3(8)JA , when i try to access the corporate directory from the phone it states that there is "no service " .

I currently have four Aironet 1200's covering a 2000' x 2000' area. The coverage isn't as good as we would like, but I don't know how to improve it. Should I simply replace the 1200's with 1500's and add more AP's?

I've been tasked with implementing a pair of Aironet 1130AG's in a remote office. The requirements are: 1) The two AP's are roots. 2) There will be two SSID's, one for internal use, one for guests (seperate VLAN).3) All security services must come fr...

HOWTO turn down the power on Cisco APs to reduce leakage?I'm trying to reduce the wireless leakage for a client, to somewhat prevent neighbors from 'seeing' the networks.I tried turning down the power levels, with no change in signal strength. I'm us...

We do not wish to use a controller and simply wish to plug our APs into a network switch. I understand that I need to revert the APs back to Autonomous mode, as LWAPP always looks for a controller? ...I have obtained c1240-k9w7-tar.default, and attem...

I just want to know about the total no user/client supports simultaneously by cisco wirless AP 1510 and 1505

Hi all, I want to know compatibility between WLC 4400 and Cisco 3845 Wireless ISR with HWIC-Access Point-AG-A. Is it compatible ???ThxShendy

Can anyone tell me what version of code is included for the AP's with version 4.1.171.0 controller code?

I finally calibrated one of our offices in WCS. Now when I go to Inspect Location Quality, I get a bunch of broken images. The specific image file is plus_7x7.png Does anyone have this problem, or if you don't, can you send me the file to isdept@bish...