Employee and "hotspot" ssids

[iholdings]

Greetings,

Trying to set up both an Employee and Hotspot ssid connection. The Hotspot is working fine. The Employee is not broadcasting SSID (by design) and will not connect from a manually configured preferred network entry. Also - Dot11Radio0 interface is working - Dot11Radio1 is in reset mode. Can someone please take a look at the attached config and to see where I'm going wrong?

[gamccall]

Well, one fix that jumps out at me is:

int d0

no encryption mode ciphers aes-ccm tkip

encryption vlan 2 mode ciphers aes-ccm tkip

IIRC, I believe a radio may go into reset mode if it has no clients on it. Try connecting on A (once you have G working properly) and see if that works.