Enable mac-filtering on AP in flex connect mode

[Muhammad Aamir Ubaid]

I had configured one access point CAP3602E in flex connect mode through a WLC 5508 after deploying the access point in flex control mode the local mac-filering is not working. before it was working when ap was in local mode. any body have to know is the mac-filtering working in flex-control mode ?

[Amjad Abdullah]

Muhammad:

Mac-Filtering is not supported with Flex Connect local auth mode and that is mentioned in the WLAN configuration page in the foot notes.

look into this: https://supportforums.cisco.com/thread/2128771

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

[Saravanan Lakshmanan]

is it central/local auth and central/local switching.          

MAC auth is supported.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b3690b.shtml