Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have 1242 AG and 3524 inline power POE switch and using poe injector for AP .My AP was running fine but suddenly
i m getting following error
Mar 1 00:00:23.340: %CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED WS-C3524-PWR-XL (000a.f4f2.28c1) *
Mar 1 00:00:23.340: -Verify the required power-injector is installed on this port: WS-C3524-PWR-XL(Fas 0/1). * Mar 1 00:00:23.341: -If a power-injector is installed, issue the command:"power inline negotiation injector installed"
how to resolve it one thing no anteena install still having error
Go "conf t" and then enter the command "power in neg i i". You'll get an message and at the end is a MAC address. Next you enter the command "power in neg i ". Save your config.
Go "conf t" and then enter the command "power in neg i i". You'll get an message and at the end is a MAC address. Next you enter the command "power in neg i ". Save your config.
