EWC seems unable to backup configuration in WEBUI?

[Rps-Cheers]

In the "Aministration> management" of the WEBUI of C9110 AP EWC, the backup & restore option cannot be found. Does it mean that the EWC can only back up the configuration in the CLI through "copy startup-config tftp:"?

[Scott Fella]

Keep in mind that this is IOS and not like AireOS. You can either download the config from the save icon on the top right corner, you will see a download button. Or you can go to the file manager and download the startup or running. The file manage also allows you to upload, delete or rename a file.

[Rps-Cheers]

Thank you for your reply, is there an example?

[Scott Fella]

I don’t have any example, just give it a try? Try downloading the config from the save icon and also from the file manager. Then upload a text file to the controller and then delete it. This would be the same for a switch running IOS-XE if you had https enabled. 

[Rps-Cheers]

Okay, I will try again if I have a chance. Thanks!

[Scott Fella]

Look at the top section of this guide. Shows how to diff a config and the download. 
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html

the doc covers upload of config but through the cli. The file manager you can do this also.