Flex connect

[prakashsemwal]

Hi,

can anyone share the best practice configuration for Cisco flex connect for 8.2 image...

[Rasika Nayanajith]

Here is the design guide for FlexConnect APs

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/ch7_HREA.html

Refer 8.2.x configuration guide for how to configure those features.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_0101100.html

HTH

Rasika

*** Pls rate all useful responses ***

[prakashsemwal]

hi Rasika,

thanks for the link but i am facing some challenges..

WLC is in Vlan 100 (head office)

AP 2602/3602 in vlan 254 (branch location) and SSID is in 254vlan

DHCP & Radius in vlan 57

WLC is reachable to dhcp, radius etc

AP's are showing in flexconnect group in wlc

sometimes branch user get authenticated but not getting ip address..

please help