12-08-2017 05:44 AM - edited 07-05-2021 07:57 AM
Not finding much information what the message means when adding APs to FlexConnect AP groups.
The column 'Conflict with PnP', what does that mean? I cannot find any information on that column and it is showing 'yes' on my APs listed under the group.
Please help me understand what this is. Thanks!
12-08-2017 07:27 AM
Hi @cbcalhoun
On the following link there's are detailed explanation about pnp and flexconnect group. However, it is no clear about the message itself.
-If I helped you somehow, please, rate it as useful.-
01-06-2018 04:40 PM - edited 01-06-2018 04:45 PM
Hi,
In release 8.3.133.0, I have the same issue with AIR-LAP1141N-E-K9, AIR-CAP3702I-E-K9 and AIR-CAP2702I-E-K9.
With AIR-AP2802I-E-K9 it's ok.
In Trap Logs I get this:
"...Cloud configured value of flexgroup headquarters" conflicts with manual configuration headquarters for AP xx:xx:xx:xx:xx:xx..."
Does any one figured this out?
01-31-2018 04:56 AM
I have not found any useful information on what this is. It is not documented very well in Cisco's documentation.
01-31-2018 08:41 AM
01-31-2018 09:25 AM
Hi Saravanan,
Thank you for the information.
Yes, after checking the AP's (AP#show capwap client rcb ) FlexConnect group name, there is a extra " in the group name.
01-31-2018 09:30 AM
01-31-2018 09:52 AM
I have exported the config from the wlc and there is no " in the Flexconnect group configuration.
I removed one access point from the existing group with the extra " and PnP Conflict and the conflict is resolved, but the extra " is still in the access point configuration.
01-31-2018 09:57 AM
01-31-2018 10:10 AM
Thank you for your help Saravanan.
I'm waiting for the 8.3MR4 Interim release, hope that resolves this bug.
Once again, thank you for your help.
01-31-2018 10:13 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide