Solved: Found a resolution for Issues found with 802.11 R on Motorola phones

dtwoods83 · ‎03-15-2022

I have been working on this issue for sometime now. When ever we enabled 802.11 r the Motorala phones would stop working and would not connect. I had a Tac case open and they couldn't even find the issue. After trying to get a VR device on to the network using wpa3. I thought that I may want to try this out. After enabling wpa2/wpa3 with adaptive r. The phone was able to connect with out issues.

Just thought I should share since I could not find anything on this issue

dtwoods83 · ‎03-15-2022

Looks like I was incorrect 802.11 r needs to be in enable mode for the moto phones to connect

View solution in original post

dtwoods83 · ‎03-15-2022

This was happening on android 10 and higher

dtwoods83 · ‎03-15-2022

Looks like I was incorrect 802.11 r needs to be in enable mode for the moto phones to connect

Rich R · ‎03-17-2022

Thanks for the info

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.190.0, latest 9800 releases, 8.5.182.11 (8.5 mainline) and 8.5.182.108 (8.5 IRCM)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs