Getting around obstructions

[DOUGLAS EVANS]

Looking for a good commercial (not homemade) solution to reflect signals around obstructions. I do not have point to point line of sight, but have a third location that does have LOS to each site.Planning to use BR350s at each site.

Thank you.

[jarchibald]

Install another bridge at the third location as a REPEATER. Check out Point-to-Multipoint Wireless Bridging.

[d.nogueira]

Placing a bridge at the third location is a good solution but remember that cuts the bandwidth in half.

If that's not an option place two bridges at the third location linked together by a crossover. Then configure two links from that third place with a diferent SSID and channel. This way you will have a better throughput