Guest network portal authentication page

[ziqex]

Hi,

After the random power cut one ssid (guest network) has stopped working.

Since then the authentication page is not opening. Guest portal setup one ISE.

Working on in diffrent locations that use same ISE config.

DHCP setup on ASA and leases binding fine with clients.

The ISE steps are as below.

Steps
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
11027 Detected Host Lookup UseCase (Service-Type = Call Check (10))
15049 Evaluating Policy Group
15008 Evaluating Service Selection Policy
15048 Queried PIP - Normalised Radius.RadiusFlowType
15048 Queried PIP - Radius.Called-Station-ID
15041 Evaluating Identity Policy
15013 Selected Identity Source - Internal Endpoints
24209 Looking up Endpoint in Internal Endpoints IDStore -
24211 Found Endpoint in Internal Endpoints IDStore
22037 Authentication Passed
24715 ISE has not confirmed locally previous successful machine authentication for user in Active Directory
24714 ISE peers have not confirmed previous successful machine authentication for user in Active Directory
15036 Evaluating Authorization Policy
15048 Queried PIP - Network Access.ISE Host Name
15016 Selected Authorization Profile - AUTHZ_CWA
11002 Returned RADIUS Access-Accept

Thank you.

Regards,

Daniel

[ziqex · Accepted solution]

Issue was caused by lack of the configuration on the ASA.

Equipment reloaded and some config from one of the contexts got lost

Thank you.