cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1661
Views
0
Helpful
2
Replies

H-REAP with IPsec

Kyujin Choi
Level 1
Level 1

Here is my question. H-REAP is working with IPsec? I found two different answers.

According to this link,  http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/hreap.html

VPN, IPSec, L2TP, PPTP, Fortress authentication, and Cranite authentication are supported for locally switched traffic, provided that these security types are accessible locally at the access point.

But, when I access my WLC (2106), it said

H-REAP Local Switching is not supported with IPsec, CRANITE authentication

        2013-04-17 10_27_30-H-Reap Design and Deployment Guide - Cisco Systems.jpg

http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/hreap.html

2 Replies 2

Saravanan Lakshmanan
Cisco Employee
Cisco Employee

Thanks for the Headsup, It'll be fixed.

Ravi Singh
Level 7
Level 7

VPN, IPSec, L2TP, PPTP, Fortress authentication,  and Cranite authentication are supported for locally switched traffic,  provided that these security types are accessible locally at the access  point. For more information you can see the below link.

http://www.cisco.com/en/US/docs/wireless/wcs/4.2/configuration/guide/wcshreap.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card