02-24-2003 01:01 AM - edited 07-04-2021 08:31 AM
I'm new in wireless, and my boss force me create an wireless solution for a big meeting hall.
It's is a big meetting hall with 40m long, 20m width, the requirement is 50-60 laplop can access to data center through wireless.
I'm thinking of two 350, is it OK ? Do I need an 12000 ?
Please hepl me on this
Thank you in advance.
02-24-2003 07:02 PM
Hi ,
If you want to go for 802.11b based wireless than 2 AP are enough but for
better throughput per user go for THREE AP 350 .
Ap350 is only for 802.11b standard ( 11meg - shared )
Ap1200 can do 802.11a ( 54 meg shared ) and 802.11b
In 802.11a standard there are 3 non overlapping channels like 1 , 6 and 11 .
So you can put all 3 AP in same are . This way you can get 11X3 =33 meg and
you can do load balance across 3 AP .
Rule of thumb is 25 users per AP .
Nilesh
02-25-2003 07:24 PM
Hi Nilesh,
Thank you very much for your response. It will help me a lot.
BTW, could you recommend some helpful online material for Cisco wireless solution and technical aspect.
Thank you in advance.
Hoang Duc Phuong
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide