Help needed !! WLC config PacketTracer

[JonSnow]

I need help with Packet Tracer tasks related to WLC configuration. Why isn't the laptop in the attached lab able to connect via Wi-Fi to the LWAP and obtain an address from the Management network, which has a DHCP pool configured on the router?

[marce1000]

       -  FYI : Community group for Packet Tracer project questions
                  + In the normal world you can have a configuration of a wireless controller (aireos based)
                    analyzed using WirelessAnalyzer input (procedure) for AireOs controllers
                   and feed the output from that into Wireless Config Analyzer

                 + (Added) Then you can also debug clients using https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/213258-collect-debugs-from-wireless-lan-control.html
                   and feed the output from those into Wireless Debug Analyzer

         Yet I have no experiences with controllers in packet tracer neither do I know if they are fully aireos based (or not)

 M.

[Martin L]

WLC is buggy" in PT; I think we had some tips to make it working on CLN site; browse  CLN 

Also check CLN community PT and CCNA forums at

https://learningnetwork.cisco.com/s/communities

https://learningnetwork.cisco.com/s/topic/0TO3i0000008jYHGAY/ccna-certification-community

https://learningnetwork.cisco.com/s/topic/0TO6e000000WEorGAG/packet-tracer

Regards, ML
**Please Rate All Helpful Responses **