help: Windows CE and WPA

[s.ferro]

Hi,

I have to install some Windows CE 4.10 devices with Aironet 350 PCMCIA card. On the cards I use firmware V5.41. The ACU is version 2.50.08. I have 1200 Access Points with IOS 12.2(15)JA. Does anyone know how to activate WPA? I can't find the entries on the ACU! LEAP works fine.

Thanks very much

[pradeepde]

Check if you are running the valid software's on all devices,

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1100/accsspts/i12215ja/i12215sc/s15auth.htm#wp1043914

[bloconnor]

here's the link for configuring wpa on Windows CE:

http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_installation_and_configuration_guide_chapter09186a008015486f.html#1174037

looks like you don't have the CE version that supports WPA.

the book that reference came from says it is for client version 2.30. here's the book reference:

http://www.cisco.com/application/pdf/en/us/guest/products/ps4555/c1679/ccmigration_09186a00801550d6.pdf