hi... I Have AIR-CAP1532I-A-K9 Access Point. how to configure this AP. how we will add controller ip to to this AP.

[bravikishor437]

hii..

we are using 8500WLC and 1552 series Out door APs. now we bought 1532I series Out door AP. for this AP how can i add controller ip and which hyper terminal version i need to use.

please provide video or pdf for this configuration

[Scott Fella]

If you want to console into each AP and enter the info, then look at this link:

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/99763-reset-lwappconfig-lap.html#backinfo

AP#capwap ap ip address <IP address> <subnet mask>

AP#capwap ap ip default-gateway <IP-address>

AP#capwap ap controller ip address <IP-address>

AP#capwap ap hostname <name>
  (optional)

It's easier if you stage these by connecting them on the same subnet as the WLC and letting it join that way and download the code.  You can then configure it, label it if you want and inverntory it prior to sending it out onsite.

[Scott Fella]

You can use putty or SecureCRT, which I use... here are other instructions:

http://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-6/design/guide/mesh76/mesh76_chapter_0101.html

Video:

http://www.youtube.com/watch?v=lXi4OBkU-0U