cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5982
Views
10
Helpful
18
Replies

High latency for wireless clients

This is one of them open questions and probably not a simple answer

AP's are MR56 and noticed alot of users complaing about wireless performance.

Looking at the clients performance on the dashbooard the latency is around 700 ms, however the number of clients connected to the access point is about 30 which to me isnt that high and wouldnt expect high latency.

I cross referenced the high latency for the device to the AP and no high latency recorded on the AP at the time the client recorded an high latency.

I also checked for channel collision and the other AP's on the same floor are using different channel. We only broadcast the SSID on 5 Ghz

What is common reasons for high latency

18 Replies 18

I am planning on updating the firmware today so will see if this improved the latency issue.

I upgraded the firmware and still expereince high latency on client side. I did ask and majority of laptops are not running on battery.

janjooa
Visitor

We have the same issue 10 people in Teams latest firmware MR56 and latency hits 1000MS++

We are using HP laptops windows 10+11 and AXE211 WNICs with latest drivers

Channel52 on the 5GHz band. We have had to call in external specialist to help now.

Meraki support isn't very good with helping on this issue

Did the external specialist pin point anything? I am having the same issues with high latency.

Review Cisco Networking for a $25 gift card