How add additional AP licenses to C3850

[marksarsalejo]

i have 3850 as wireless controller. we have 21 AP's. 2 months ago we bought 2 additional AP. how to add the 2 additional AP license. 

current configuration.

License Level In Use: ipbase
License Level on Reboot: ipbase
Evaluation AP-Count: Disabled
Total AP Count Licenses: 21
AP Count Licenses In-use: 21
AP Count Licenses Remaining: 0

thanks.

Mark S.

[WiFi Trainers · Accepted solution]

Hi Mark,

You can use the following command to add additional licenses on the 3850:

license right-to-use activate{apcount ap-number slot slot-num} |evaluation} [ acceptEULA].

The below document gives the entire information:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/system_management/configuration_guide/b_sm_3se_3850_cg/b_sm_3se_3850_cg_chapter_0100.html#task_9D215D9C313C450FAA1D011CA9E9AB53

Best Regards,

www.wifitrainers.com

Learn with the Best, To be the Best

[marksarsalejo]

Thanks for the reply. 

  license right-to-use activate apcount ap-number slot slot-num [ acceptEULA] 

in that config. what slot im going to use. see attached file.

[WiFi Trainers · Accepted solution]

Hi Mark,

By default it will be 1. Unless you have a stack of switches, in which case you will need to select the right number.

Best Regards,

www.wifitrainers.com

Learn with the Best, To be the Best

[marksarsalejo]

hi Wifi Trainers,

license right-to-use activate apcount 24 slot 1 [ acceptEULA] . the result are these.

License Level In Use: ipbase
License Level on Reboot: ipbase
Evaluation AP-Count: Disabled
Total AP Count Licenses: 45
AP Count Licenses In-use: 21
AP Count Licenses Remaining: 24

thank you for the reply!

[WiFi Trainers]

Happy to help Mark :).

Best Regards,

www.wifitrainers.com

Learn with the Best, To be the Best