Wireless

Hello everyoneI have an AP 2602e the boot up is:Find image for Ethernet (3 times)Find image for DotRadio0 or DotRadio1(for this Interface the AP will find the image (WLC) )The AP 2602e is managed by WLC 5508 and it´s configured with mesh.I want chang...

Hello;  I recently upgraded our 5508s to 7.0.98 I am now seeing this mesage on the primary WLC while running adebug on a client *apfMsConnTask_1: Sep 29 11:05:36.114: Deleting the client immediatly since WLAN is changed.  anyone know what this means?...

Hello everyone. I'm starting in the certification of Cisco Wireless. I buy from EBAY one AP 3600 "Aironet 3600 model air-cap3602i-a-k9". This equipment was removed from an operating environment.  After trying to set I note the following: 1. I can lo...

Dear community, Just a lean and mean quick question which I don't seem to find the answer for in any doc: Does the CIPC (Cisco IP Communicator softphone application on Windows) support 802.11e WMM tagging? As you may know, this is the most critical...

I have CMX Presence 10.2 and I have my Cisco 5520 WLC added to CMX but whenever I am adding additional AP's to the WLC I am not seeing them in CMX Presence and Analytics, Manage, Access Points, Select Access Points.  I can see the ones that I have al...

Cisco Aironet 1600 function only in 54mb, how to configure for function in 150mb or 300mb?

Hi  There is a way to check CT5520 reload reason? If some one can tell me the command for reboot history, it would be better. Thx

Hello, I have a wireless network deployment consisting of WLC 2504 and three 1702 access-points. All phones and laptops are seeing the SSID of the WLANs configured on the WLC, except iPhone 4S with the latest iOS version - 9.3.3 The iPhone can see (...

Hi. I just recently had shipped 4x of the above ap's I can't get them to add to our WLC AIR-CT5508-K9 v7.4.100 because of version incompatibility according to http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.htm...

Is there a way to use batch files to configure APs from Windows 7?  I have seen it done in Linux.  A batch file was written for setting up flexconnect mode and assigning APs, naming APs and assigning them to groups.  I have not found a method to do i...