08-13-2019 06:51 AM - edited 07-05-2021 10:51 AM
There are 3 DMZ controllers . One is in production and the two are newly deployed. The new controllers were deployed with the similar configuration from WLC1.
Now the question is how do we sync local net user profiles to other new controllers.
Please suggest.
Note: All thee controllers are AIR-CT5508-K9 and all three are standalone no redundant is available.
Thanks in Advance
08-13-2019 07:59 AM
- Controllers essentially manage AP's ; not users. You can make an AP fail over by letting it know the new controller it has to associate with. Several options are available for this (such as DHCP option 43). Albeit controllers can authenticate users using the same radius servers (e.g.); they will have to-re authenticate once an ap has failed over.
M.
08-13-2019 01:41 PM
You can get "show run-config commands" output from existing WLC & filter out local netuser configuration (start with netuser add .....)
However note that you need to know those local user passwords as above command does not show those in clear text.
HTH
Rasika
*** Pls rate all useful responses ***
08-20-2019 06:42 AM
You can see the password in plain text by:
config passwd-cleartext enable
Then to disable:
config passwd-cleartext disable
config paging disable
grep include netuser "show run-config commands"
08-20-2019 05:13 AM
Since the 2 WLCs are new, you can export the config of WLC1 then import it to WLC2 and WLC3. You just have to reconfigure the IP addresses in the interfaces and the hostname.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide