11-19-2012 10:06 AM - edited 07-03-2021 11:04 PM
Hi
I need know how many clients can associate for this AP model
AIR-CAP3502I-A-K9
AIR-LAP1131G-A-K9
I have 45 clients currently associated with each AP.
Thanks
11-19-2012 01:02 PM
Like I know from the datasheets Cisco said up to 400, but that is maybe only theoretically.
in real life I would follow these recommendations:
https://supportforums.cisco.com/docs/DOC-5500
remember that "b" clients also makes the wifi bad ..
I think you could handle 40-50 clients well, without any trouble makers
regards,
Sebastian
11-19-2012 01:15 PM
I need know how many clients can associate for this AP model
Theoretically, you can have 1098 clients per WAP. However, in practice, this will depend entirely on the type of Wi-Fi traffic being pushed around.
Cisco recommends no more than 25 clients per WAP. But if you are just pushing emails, HTML around then this number can go as high as 35 clients per WAP. If you are pushing HD video, then the number goes down to around 8 clients per WAP.
I have 45 clients currently associated with each AP.
This is too much. Even for a 1131. Take note that, unlike the 3502, the 1131 only has FastEthernet data port. So with 45 clients connected to the 1131, you may have some bottleneck.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide