07-08-2013 08:34 AM - edited 07-04-2021 12:22 AM
Fyi, The Cisco IOS C2600 software is AP3G2-RCVK9W8-M, version 15.2(2)JB
Boot loader <AP3G2-Boot-M> loaderversion 12.4(25e) JA1
Solved! Go to Solution.
07-08-2013 10:25 AM
There is no web GUI. That ap is a lightweight access point and requires a WLC. If you want a standalone access point then you need to convert that to autonomous. You need to also be able to download the autonomous software which requires a support contract.
Here are various way to convert these AP's.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Sent from Cisco Technical Support iPhone App
07-08-2013 06:27 PM
Only autonomous AP's will there be a GUI. So you need to convert your lightweight access point to autonomous then you can use the GUI.
Sent from Cisco Technical Support iPhone App
07-08-2013 10:25 AM
There is no web GUI. That ap is a lightweight access point and requires a WLC. If you want a standalone access point then you need to convert that to autonomous. You need to also be able to download the autonomous software which requires a support contract.
Here are various way to convert these AP's.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Sent from Cisco Technical Support iPhone App
07-08-2013 05:53 PM
Hi Scott,
Thanks... So, even I have converted to autonomous, there is no way for me to access via GUI, am i right?
07-08-2013 06:27 PM
Only autonomous AP's will there be a GUI. So you need to convert your lightweight access point to autonomous then you can use the GUI.
Sent from Cisco Technical Support iPhone App
07-08-2013 11:17 PM
As Scott mentioned, only autonomous APs have GUI.
Make sure that HTTP/HTTPS server is enabled on the AP and try to oepn the GUI with the BVI IP address of the AP from the browser.
Rating useful replies is more useful than saying "Thank you"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide