08-09-2015 08:49 PM - edited 07-05-2021 03:43 AM
Dear all,
Do you let me know step to configure controller 2504 with AIR-CAP1702I-E-K9 ?
on AP it show: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.s
Best Regards,
Rechard
08-09-2015 10:51 PM
08-10-2015 12:41 AM
Dear Leo,
Do you have document how to configure controller 2504 with AP ?
Now i'm not clear how to join AP with controller ?
Best Regards,
Rechar
08-10-2015 01:23 AM
08-12-2015 09:28 PM
Dear Leo,
i got some error on AP
*Mar 1 00:06:52.139: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.2.59, mask 255.255.255.0, hostname AP0e0.1dfc.b000
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.2.10)
=============
I create DHCP on Cisco 3560 and connect to Cisco 2960 POE by Trunking.
and i connect from WCL to Cisco 2960
on Core-switch 3560:
interface Vlan10
ip address 192.168.2.1 255.255.255.0
!
interface FastEthernet0/11
description Connect to SW-2960
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport mode trunk
spanning-tree portfast
On C2960
interface FastEthernet0/1
description Connect to AP
switchport access vlan 10
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/5
description Connect to WCL
switchport trunk native vlan 10
switchport mode trunk
spanning-tree portfast
.
now it cannot talk to from AP to WCL.
08-13-2015 12:58 AM
I create DHCP on Cisco 3560 and connect to Cisco 2960 POE by Trunking.
Post the configuration of the DHCP scope. I want to see if you have DNS settings and DHCP Option 43 or not.
What is the IP address of the Management Interface?
08-13-2015 01:19 AM
Dear Leo,
ip dhcp excluded-address 192.168.2.1 192.168.2.20
!
ip dhcp pool vlan10
network 192.168.2.0 255.255.255.0
dns-server 192.168.2.10
default-router 192.168.2.1
option 43 ip 192.168.2.10
!
!
ip dhcp-server 192.168.2.1
on WCL.
Port 1
ip add 192.168.100.10
=======
Port 3
Connect to Sw2960
ip add 192.168.2.10
08-13-2015 04:10 AM
option 43 ip 192.168.2.10
This is incorrect.
This should be "option 43 hex f104C0A8020A".
And where is your DHCP option 60?
08-13-2015 06:29 PM
Dear Leo,
Let me try add command option 43 hex f104C0A8020A
and i don't have DHCP option 60, Do we need to use DHCP option 60 ? and where should we config on ?
Best Regards,
08-13-2015 11:22 PM
DHCP Option 60 is for VCI. Read THIS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide