How to configure IPAD to connect Wireless (WPA2)

[peeravin]

Hi Expert,

       I've problem that I cannot configure IPAD connect Wireless LAN (Auth   WPA2)  so I don't know How I have to configure anything on  Wireless Controller or I've to configure anything on IPAD. Please advise me sir.

Best Regards

Peera

[vinodjad1234]

Hi,

As I understood , you need configuration on controller side ...  if that is the case... please follow below procedure ..

once you login to controller through GUI ... you need to select " Wireless " option

1) select wlan which you want to configure with WPA2 ...

2) you will get page with all details about corrousponding WLAN

3) select " Security " option in wlan option

4) once you click on security option , you will get option with WPA+ WPA2

5) select that option with what type of encryption you required ...

I believe you need wpa2 with personal edition. if so ... please select PSK with TKIP option .

once you do that , it will be activated from controller side for the respective Wlan ...

About IPAD ... you need to select wpa+wpa2 with psk and TKIP .... I do not have clear idea about IPAD ...

[peeravin]

HI expert,

      Do you know what version of IPhone,IPAD firmware can support WPA2 (EAP tls,fast,peap) ?

[vinodjad1234]

sorry,

I do not have idea about IPAD firmware .

[peeravin]

Hi Expert,

Could you tell me that Which command or tool in wireless controller use for monitor when client try to establish ?

show logging, ....?

thank you very much

[vinodjad1234]

Hi,

login to controller through console or telnet and give below commands

1) show client details < client MAC address >

2) debug lwapp client ?

let me know whether your requirement is fulfilled?

thanks,

vinod

[vinodjad1234]

Hi,

for more info. please go through below link.

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080b3e118.shtml

thanks,

vinod

[George Stefanick]

Hello,

If you want to do advance security with the iPad you will be required to download the apple utility to open these options.

http://support.apple.com/kb/dl926

Is this what you are looking for?