How to create multiple LDAP server with same IP address on WLC 2504

[An7464]

I configured LDAP server for web authentication. at first i created 1 ldap server (IP 192.168.10.10 port 389) with user based CN like "DC=domain, DC=com" and assigned it to test Wlan: config wlan ldap add 5 1, It worked !!!

Then i want only users from accounting OU are allowed to access accounting WLAN, so i created 1 more LDAP server with same IP, Port but different user based CN "OU=Accounting, DC=domain, DC=com". then assigned the new ldap server to accounting wlan: config wlan ldap add 2 2

But users outside of accounting OU can still login into accounting WLAN and thats not good. Then i created new LDAP server with different IP (192.168.10.11 port 389) and user based CN "OU=Accounting, DC=domain, DC=com". It worked this time, only users from accounting OU can login.

if i have to configure LDAP servers for 5 more WLANs how should i do that?

Please enlighten me, thank you.

[balaji.bandi]

I believe you can alone achive with this using LDAP and WLC, you need Radius (NPS) this kind of requirement.

Below example guide for reference :

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71683-dynamicvlan-config.html