how to enable accounting on 7500?

[matantal.il]

hi,

it seems there is no option for flexconnect registered AP's to work with external accounting server.

I am using zeroshell server to authenticate with the radius server,which works perfectly!

but there is no option under flexconnect security group to specify accounting server.

is there a way to redierct AP to a local acoouting+authentication radius ?

[Shaoqin Li · Accepted solution]

per 7.4 config guide,
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/flexconnect/config_flexconnect_chapter_01.html

Note
Only the Session Timeout RADIUS attribute is supported in standalone mode. All other attributes as well as RADIUS accounting are not supported.

so if central auth it should be fine.

Sent from Cisco Technical Support iPad App

[matantal.il]

hi shaoqin,

thanks for the fast reply.

i must understand, it means i cant direct accounting for local radius on remote site?

what do you mean by central auth?

thanks in adavnced

[Shaoqin Li]

you can use 'central auth, local switching', neans auth traffic will be sent back to wlc but traffic gets switched locally.

Sent from Cisco Technical Support iPhone App

[matantal.il]

the thing is that my radius+accounting  server is not reachable from controller.

can you think of other solution?

thanks a lot for the help though

[Shaoqin Li]

flexconnect backup radius accounting currently is not supported as per config guide...

Sent from Cisco Technical Support iPad App