How to upgrade 5508 WLC serving different AP models?

[KevinYounil1]

I have to 5508 WLCs Serving 3700,3500,1600 and 802 APs. I want to upgrade them to the latest image version which is 8.3.x.x. I realized there are two types of images in the download center :

-One image for all APs(except AP802)

-another bundle just for AP802

I don't know how can I have both images at the same time on WLC and push them to all APs.

I should mention that I know the whole upgrade process if I had just one image for all APs.

Any help in this regard will be highly appreciated.

Best regards

Kevin

[Rasika Nayanajith · Accepted solution]

Hi Kevin,

Refer below and follow the instructions

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn83.html#87312

You simply need to upgrade using one image at a time.

HTH

Rasika

*** Pls rate all useful responses ***

[KevinYounil1]

Thank you very much Rasika for the prompt response.