04-28-2011 01:53 AM - edited 07-03-2021 08:08 PM
The issue is i am not able to add new APs on WLC. Currently, there are 48 APs registered. But it does not allow 49th AP.
i tried a new ap to configure and add in the network but it is not registring but when i remove any other ap from the network the newer which i was trying it will registerd.
So please help me regarding this issue
04-28-2011 02:12 AM
Sunil
YOu need to enable LAG, or use multiple ap-managers...
http://www.cisco.com/en/US/docs/wireless/technology/controller/deployment/guide/dep.html#wp1061736
04-28-2011 03:20 AM
I tried to make a new ap-manager interface it is not working
04-28-2011 11:22 AM
As mentioned, either settingmultiple ap-manager interfaces, or LAG.
LAG is the recommended one..
al the DYNAMIC interfaces used as untagged are the ones that are going to be deleted... management and ap-manager are static interfaces, you cannot delete those.. yes, APs will loose connectivity to the WLC but it igoing to be for some seconds.. but definitively you must do it in order to handle more APs..
04-28-2011 11:29 PM
Thanks for your reply
I had done with LAG
i enable LAG and its working fine i joined 2 more access ping its working fine now its 50 ap earliyer its 48 ap
thanks for ur support......
04-29-2011 08:03 AM
no, just the DYNaMIC interfacesare the ones that will be deleted..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide