06-26-2014 07:58 AM - edited 07-05-2021 01:06 AM
I have a cisco 5508 wireless controller with 7.6.100.0 software version installed. I use the Web Authentication type with default web page that I modified to add my company logo. My problem is that the system only take the username to authenticate the user, even if the password is incorrect. can anybody help find a solution ?
Solved! Go to Solution.
06-26-2014 08:45 AM
means there is problem in html code.
Try to upload webauth bundle provided by cisco and then try to modify it.
From where to download:
http://software.cisco.com/download/release.html?mdfid=282600534&flowid=7012&softwareid=282791507&release=1.0.2&relind=AVAILABLE&rellifecycle=&reltype=latest
Regards
Dont forget to rate helpful posts
06-26-2014 08:45 AM
means there is problem in html code.
Try to upload webauth bundle provided by cisco and then try to modify it.
From where to download:
http://software.cisco.com/download/release.html?mdfid=282600534&flowid=7012&softwareid=282791507&release=1.0.2&relind=AVAILABLE&rellifecycle=&reltype=latest
Regards
Dont forget to rate helpful posts
07-22-2014 07:33 AM
Hi,
Yes it's better 1st try by uploading the webauth bundle and make customization on it and then try.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: