increase wireless client subnet with a non-contiguous subnet

[fwilliams-iumg]

Is there any way to add a non-contiguous subnet to a WLAN on the WLC 4400 software 7.0.98.218 because I have run out of IP address space on a single class C?

[Scott Fella]

You can use interface groups and bundle the two together.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b78900.shtml

[George Stefanick]

Scott good call.. only note you would need to upgrade your WLC to 7.0.116.0 to support interface groups.

[Scott Fella]

Yup... George is right and you would have to upgrade. I guess another way would be to use AP Groups.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Sent from Cisco Technical Support iPhone App