IOS 5 (IPAD and IPHONE) Authentication issues using LEAP

[franklinlopez]

Hi All,

We just upgraded some of our devices to IOS 5 (IPAD and IPHONE) and wifi stopped working after we turn on/off the devices. In order to make it work we have to erase and recreate the wireless profile.

Is anyone experiencing this kind of problem?

We are using the below settings

WCS Version:                          7.0.172.0

WLC version:                           7.0.116.0                                              

WiFi SSID:                               XXXXXXX

Broadcast enable:                   No

Operation Mode:                      Network Infrastructure.

Security Settings:                    Enterprise Security

Network Authentication:          Open

Data Encryption:                      WEP

Enable 802.1x:                         Yes

  Authentication Type:             LEAP

  Server type:                           Radius.

Also we found some Apple users having the same, see below the discussion

https://discussions.apple.com/thread/3384783?start=0&tstart=0

Regards

Franklin Lopez

[mborga]

Hola Franklin,

I had also similar issues when I migrated from IOS 4.3.x - to IOS5 in a LEAP-WPA context. I could cirmcumvent the problem by generating a new (Wifi) Connection Profile with the Apple IPhone Configuration Utility and pushing the profile to the IPhone/IPad. By setting up the connection profile on the IPhone/IPad or by taking the migrated profiles I couldn't connect to the Network.

Hope this helps.

Saludos Mauro

P.S.: May be the problem the problem has been fixed with IOS 5.01

[franklinlopez]

Thanks

We did the same but we still have the issue every 20 min ( disconect)

We are testing with a new ssid

Using wap2 aes peap and broacasting the ssid i think is working so far with iphone

Let's wait for apple with the fix

Sent from my iPhone