IP http server errors on page

[rpaquin]

I have about 60 ap1200's running 122-15.XR2 and i've upgraded several to 12.3.4-JA and then 12.3.7-JA.

When i've upgraded the ap's to 12.3.4-JA, if you navigate to the http screen it comes up with blank forms and says "done, with errors on page"

i've done it on four devices, 2 wds controllers, and two regulars, and the only one to properly display a http page is one that is running only B radios. the other three are running G radios.

Upgrading to 12.3.7-JA from there, did not solve the issue. the web pages will come up the same, blank form, no info filled in.

any idea what could possibly be missing or is this a bug in the code?

[rpaquin]

bug in the code CSCeh51638

works in 12.2.15 XR2, fails in all 12.3.X code

I have priv commands for audit access, remove those and the web interface works fine..

i wonder if the audit guys will like that.

if cisco gives me a workaround for cli access without the priv levels, i'll post it.

don't really care that the web interface only supports 1/15 but it should still allow cli priv levels.