Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ok.. I'm looking at these solutions and I'm very puzzled why I would purchase a WLC/WCS/AP vs a WLSE/AP solution. First with WLC, i have to deploy multiple WLC's to get global redundancy. Don't need that with AP/WLSE combo. WLSE isn't a global failu...
Trying to update windows version of LMS 2.5 to december 2005 update. The upgrade file runs, verifies integrity, extracts the zip into the temp folder then launches the setup.exe... and does absolutely nothing. Anyone have any suggestions?I opened a T...
I have about 60 ap1200's running 122-15.XR2 and i've upgraded several to 12.3.4-JA and then 12.3.7-JA.When i've upgraded the ap's to 12.3.4-JA, if you navigate to the http screen it comes up with blank forms and says "done, with errors on page"i've d...
ok, Am I missing something or if I do a:username [name] password [password] encryped priv 15from the ssh session.when i go back and look at the run, I shouldn't be able to see the passwords correct? ie the encryped command.. because i can, I'm wonder...
if your running any 10/100/1000 blades, and any of them are trunks, make sure the trunks only do allowed vlan's for what is necessary. my issue was I had 48 port sfp that was mostly trunks, I had complaints in ios about more than 1800 vlan instances ...
how many vlan's do you have?what modules?I currently have the same issue, I'm using a 48 port sfp module to trunk locations and when I put in my full vlan complement, the switch just chokes and dies. which is only 150 vlans.. anything over 75 or so s...
actually, if he does have ciscoworks, I'd be very leery with 12.1.13... I remember something about Cisco changing the directory structure/how the update worked from 12.1.13 to 12.1.19.. something that Ciscoworks wasn't very happy about. That was a fe...
I would often do this, I had a campus with about 300 switches and poor power. I would do a load from ciscoworks, reboot a couple, make sure I had no issues, then load the rest... Wait for a month or so, then check to see which ones hadn't reloaded.. ...
is this a complete from scratch setup?Basically it is 50 ap's per switch, 200 per stack for the 3750.. you'll have more redundancy by building multiple stacks in your closets.WISM = money.. not for the card per se, but I believe it require the sup72...
