IW3702AP

[nandini-roy]

IS THE ABOVE-MENTIONED INDUSTRIAL GRADE ACCESS POINT ABLE TO BE USED AS A SELF-MODE CONTROLLER?

CAN IT BE USED WITH CATALYST'S ACEESS POINT OF THE EWC MODEL?

WILL IT BE COMPATIBLE WITH THE 9800 CONTROLLER?

Please do help with above-mentioned questions

[Mark Elsen]

  - Ref : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
            Look for IW3702 with find in browser for all info's on compatibility

   ===> Added : this AP can be used in autonomous mode too :
                                    https://software.cisco.com/download/home/286287624/type/284180979/release/15.3.3-JPN4

 M.

[Rasika Nayanajith]

IS THE ABOVE-MENTIONED INDUSTRIAL GRADE ACCESS POINT ABLE TO BE USED AS A SELF-MODE CONTROLLER?

No, It cannot operate as Mobility Express (name Cisco used for self mode controller on 11ac wave2 APs). Refer below table. It can connect to a another Mobility Express AP act as primary.
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/release_notes/b_ME_RN_810.html 

CAN IT BE USED WITH CATALYST'S ACEESS POINT OF THE EWC MODEL?
Yes

WILL IT BE COMPATIBLE WITH THE 9800 CONTROLLER?
Yes, refer the compatibility matrix shared by Marce.

HTH
Rasika
*** Pls rate all useful responses ***