Hi,
I have AIR-LAP1131AG-N-K9 and AIR-WLC4402-25-K9 in my network. Recently we have purchased AIR-LAP1142N-N-K9, and we are facing some issues registering this products with WLC4402.
WLC System Information-
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 4.2.205.0
RTOS Version..................................... 4.2.205.0
Bootloader Version............................... 4.2.205.0
Build Type....................................... DATA + WPS
Now I have got an impression that it would require version 5.2 to get LAP1142n working. (ref.- http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn52.html)
Below messages i'm getting from LAP1142n console-
*Jun 30 09:59:34.582: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (IMAGE_DATA) exceeded more than max(1)
*Jun 30 09:59:34.582: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 30 09:59:34.582: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 30 09:59:34.589: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Jun 30 09:59:34.589: Image could not be downloaded: LWAPP goes back to discovery
*Jun 30 09:59:34.593: lwapp_image_proc: unable to open tar file
*Jun 30 09:59:34.594: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY examining image...
Loading file /c1140...
*Jun 30 09:59:44.600: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Jun 30 09:59:44.600: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
*Jun 30 09:59:44.607: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Jun 30 09:59:28.585: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds
Is there any way I can configure LAP1142n under WLC with software version 4.2.205.0.
Regards,
Sagar
