About sagar.sarker

sagar.sarker · 06-02-2012

Hi,I want to connect WS-C2960S-48TD-L switch to WS-X6708-10G-3CXL module in Cisco WS-C6503-E switch. WS-X6708-10G-3CXL is C6K 8 port 10 Gigabit Ethernet module with DFC3CXL which requires X2 module. on the otherhand, WS-C2960S-48TD-L requires SFP+. N...

sagar.sarker · 03-31-2012

Hi,Can anyone help me with UCM licensing for CP-3905 IP phones. As I know, only CP-6901 & CP-6911 phones require basic license, all the other IP phones use Enhanced license. Being a SIP phone, what license is required for CP-3905.Regards,Sagar

sagar.sarker · 03-13-2012

Hi,Can anyone help me on how to configure third party IP Phone with CUCM. I have been trying with one NET320 IP phone but to no avail. I haven't found any TFTP configuration in the phone. Any help in this regard is highly appreciable. BR\\Sagar

sagar.sarker · 02-20-2012

Hi,In our network environment we have an ASA5505-UL-BUN-K9. Now we have purchased ASA-SSC-AIP-5-K9= card for IPS and want to upgrade the firewall for IPS functionality. Can anyone tell me what other software or Cisco service for IPS is required.BTW, ...

sagar.sarker · 01-07-2012

Hi,We have MDS9222i in our data center. There are two SAN in the environment - IBM & Brocade. IBM SAN connectivity between DC & DR are through dark fiber now. This is true for SUN storage networking as well. Now we want to connect both IBM & SUN stor...

sagar.sarker · 01-07-2013

Hi Bala,Precisely UC Manager Essential License.ref. - http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/ip_comm_og_ucl_based_1021.pdf Table 4 - Device Support for TelePresence, Desktop Video, Enhanced, Basic, an...

sagar.sarker · 11-01-2012

Hi,Anyone having any experience integrating MDS9222i with IBM 2109 M48 or any other IBM SAN switch. Any suggestion or really appreciated.Rgds,Sagar

sagar.sarker · 03-31-2012

Hi Chris,By the time of opening this discussion, I had finished preparing the platform for Unity installation. I will start installing unity software very soon. Before that can you tell me if there is any way that we don't use unity exchange for send...

sagar.sarker · 03-31-2012

Hi Abdul,Table 4 is exactly what I was looking for. I found the document but didn't spent much time on it. Thanks for pointing them out.Regards,Sagar

sagar.sarker · 03-31-2012

Hi Abdul,Thanks for your quick response. Yes, UCL is required for CP-7905 IP phone & I want to know what kind of UCL (basic or enhanced) is required for this phone when used with CUCM 8.6. Data sheet didn't help me finding the answer.Regards,Sagar

Member Since	‎01-11-2011 10:19 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	71

User Statistics

User Activity

10 G connectivity between X2 & SFP

CUCM license for CP-3905

Using thrid party IP Phone with CUCM

ASA-SSC-AIP-5-K9= card with ASA5505-UL-BUN-K9

Cisco MDS connectivity with IBM & Brocade SAN Switch

CP-3905 License requirement

Cisco MDS connectivity with IBM & Brocade SAN Switch

Unity voice message issue

Re: CUCM license for CP-3905

Re: CUCM license for CP-3905